VERTICAL TURRET MILLING MACHINE

Product Details:

Milling machine refers to a device that performs milling operations by rotating a tool that has several cutting edges symmetrically arranged about its axis, but not necessarily fixed in position. The workpiece is commonly held in a vise or similar device clamped to a table that can move in three perpendicular directions. Disk- or barrel-shaped cutters are often clamped through holes in their centers to arbors attached to the machine spindle, but sometimes they just have teeth on their peripheries or both peripheries and faces. An end mill is also a cutter shaped like a pencil with a tapered shank that fits into this spindle; it has cutting teeth on its face and spiral blades on the lateral surface. To mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification:

Standard Accessories:

• 2 Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M4S
• Delivery Time: Ready Stock

Product Details:

A milling machine is a machine that rotates a circular tool that has several cutting edges symmetrically arranged about its axis; the workpiece is commonly held in a vise or similar device clamped to a table that can move in three perpendicular directions. A disk- or barrel-shaped cutter is attached through holes in their centers to arbors attached to the machine spindle; they only have teeth on their peripheries or both peripheries and faces. An end mill is shaped like a pencil with a tapered shank, which fits into the machine spindle; it has cutting teeth on its face and spiral blades on the lateral surface. To mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification:

Standard Accessories:

• Z Axis Motorized
• 2 Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M4SZ
• Delivery Time: Ready Stock

Product Details:

The cutting of metals by milling is the most common metal machining process. Creating intricate shapes for the fabrication of parts by hand, or by machines that cut materials with a rotating spindle, is quicker and more cost-effective than other conventional methods. It allows for smaller scale production, since less material is required to create the part due to its movement in repetitive patterns. To mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification:

Standard Accessories:

• 2  Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M5
• Delivery Time: Ready Stock

Product Details:

Additional Information:

• Production Capacity: 60 Per Month
• Delivery Time: Ready Stock

Product Details:

Table Size                                            : 1270 x 254mm

X- Axis Longitudinal Travel            : 760mm

Y - Axis Cross Travel                         : 400mm

Z – Axis Vertical Travel                   : 405mm

Guide Way – XYZ                             : Dovetail

Ram Travel                                          : 510mm

Spindle Taper                                    : NT30 (R8 Spindle also Available)

Spindle Quill Travel                         : 127mm

No. / Spindle Speed                        : 16/70-4620rpm

Motor Power                                     : 3 HP

Machine Weight                               : 1200kgs.

Product Details:

Product Details:

Machinery that rotates a circular tool that has several cutting edges symmetrically arranged about its axis. The tool is commonly held in a vise, and may also be held by clamping it to a table, clamped to a table. The workpiece may be clamped on a workbench, which is driven by power against the cutter. Cutting teeth are often on both peripheries of the tool and on its face. A typical end mill fits into an arbor mounted on the machine's spindle; it has cutting teeth on its face and spiral blades on its lateral surface to mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification:

Standard Accessories:

• 2 Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M4
• Delivery Time: Ready Stock

Product Details:

The milling machine is used in various ways to create various shapes. Usually, the workpiece is held in a vise or similar device clamped to a table that can move in three perpendicular directions. An end mill is a cutter shaped like a pencil with a tapered shank that fits into the machine spindle; it has cutting teeth on its face and spiral blades on the lateral surface. To mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Model No. M3 Vertical Turret Milling Machine:

• Hardened & Hand Scraped Slideways, Multi-Function Quill Feed with Standard Accessories

Technical Specification:

• XAxis Longitudinal Travel: 760mm
• YAxis Cross Travel: 400mm
• ZAxis Vertical Travel: 405mm
• Spindle Quill Travel: 127mm
• No. / Spindle Speed: 16/70-4620rpm
• Quill Feed : 0.04, 0.08, 0.15mm/rev

Standard Accessories:

• 2  Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar 
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M3
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: READY STOCK

Product Details:

Machinery that rotates a circular tool that has several cutting edges symmetrically arranged about its axis. The tool is commonly held in a vise, and may also be held by clamping it to a table, clamped to a table. The workpiece may be clamped on a workbench, which is driven by power against the cutter. Cutting teeth are often on both peripheries of the tool and on its face. A typical end mill fits into an arbor mounted on the machine's spindle; it has cutting teeth on its face and spiral blades on its lateral surface to mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification:

Standard Accessories:

• Z- Axis Motorized
• 2 – Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M5Z
• Delivery Time: Ready Stock

Product Details:

Milling machines are used to produce flat surfaces such as drill bits and bearings. They typically consist of a spindle, headstock and table, with the spindle in communication with collets that clamp cutting tools. The spindle can be any size required for the application, from a small diameter spindle used in lathes and milling machines to large diameter spindles useful for producing large parts. The headstock drives the collets which grip the cutting tool according to its shape as determined by an encoder attached to the tool itself. To mill the teeth of a spur gear, a disk-type cutter with its cutting edges in the shape of the space between the teeth of the gear is milling the gear blank one space at a time.

Technical Specification: 

Standard Accessories:

• 2  Axis DRO
• Coolant System
• Clamping Kit
• Collet Set R-8
• Machine Lamp
• Front & Rear Rubber Chip Guard
• Electrical Cabinet & Control Panel
• Draw bar
• One Shot Lubrication System
• Tool Box
• Instruction Manual

Additional Information:

• Item Code: M4A
• Production Capacity: 50units
• Delivery Time: Ready Stock
• Packaging Details: STANDARD PACKING